VM600IOC16T PNR200-565-000-013

Pre-Installation Requirements

1. Environmental Conditions
   • Temperature: -40°C to +70°C (derate 1%/°C above 55°C)
   • Humidity: 5-95% RH non-condensing
   • Vibration: ≤5g @ 10-500Hz (IEC 60068-2-6)
2. Safety Verification
   • Confirm hazardous area certification:
     • Class I Div 2 / Zone 2 (ATEX II 3G Ex ec IIC T4)
   • Verify insulation resistance: ≥100MΩ @ 500V DC

Mechanical Installation

Step 1: Mounting

• Install on 35mm DIN rail (EN 60715 compliant)
• Secure with end clamp (Included: P/N CLP-200)
• Torque Specifications:
  • DIN rail lock: 0.8 Nm ±0.1 Nm
  • Terminal screws: 0.6 Nm (AWG 24-12)

Step 2: Clearance Requirements

Electrical Connections

Wiring Diagram:

[Terminal Block TB1] 1-8: 24V DC Inputs (Sink mode, 3mA @ 24V) 9-16: Relay Outputs (5A @ 250V AC resistive) [Shielding] - Use braided shield (≥85% coverage) for analog signals - Ground shield at single point via PGS-6 grounding kit

Critical Notes:
WARNING

• Never mix AC/DC voltages on same terminal group
• Isolation voltage: 1500V AC between I/O groups
• Maximum lead length: 50m (twisted pair required >10m)

VM600IOC16T PNR200-565-000-013 PDF

vibro-meter VM600IOC16T PNR200-565-000-013

···········································································································

Our advantages:

1. The brand new product comes with a one-year

comprehensive warranty.

2. All products undergo strict quality inspections.

3. Contact us and our team will provide competitive

quotes and procurement plans.