vmf-cpum 200-595-046-114 Vibro-meter

‌Vibro-Meter VMF-CPUM 200-595-046-114 Quick Setup Guide‌

‌1. Hardware Installation‌

• ‌Mounting‌: Secure the module in a compatible VM600 rack or DIN rail enclosure.
• ‌Wiring‌:
  • Connect ‌24V DC power‌ to terminals A1 (+) and A2 (-).
  • Link ‌sensors‌ (accelerometers, proximity probes) to dedicated input channels (e.g., CH1-CH8).
  • Integrate with control systems via ‌Ethernet‌ (RJ45) or ‌RS485‌ (terminals COM1/COM2).

‌2. Initial Power-Up Sequence‌

1. Apply power; verify ‌PWR LED‌ illuminates green.
2. Wait for ‌RUN LED‌ to flash (module initializing).
3. Confirm ‌FAULT LED‌ remains off (no critical errors).

‌3. Software Configuration‌

Requires VM600 Workstation Suite installed on PC:

• ‌Step 1‌: Connect PC to module via Ethernet switch.
• ‌Step 2‌: Launch ‌VM600 Configurator‌, detect module using factory IP (192.168.1.100).
• ‌Step 3‌: Configure monitoring parameters:
  plaintextCopy Code
  - Sensor Type: IEPE/Proximity (select per channel)
- Measurement: Vibration (ppm/µm), Speed (RPM), Temperature (°C)
- Alarms: Set thresholds (e.g., Warning: 100µm, Danger: 150µm)

• ‌Step 4‌: Save configuration to module flash memory.

‌4. Runtime Operation‌

• ‌Real-time Monitoring‌:
  • View live data via VM600 ‌Dashboard‌ (trends, waveforms).
  • Check ‌STATUS LEDs‌:
    • ‌GREEN‌ = Normal operation
    • ‌YELLOW‌ = Warning threshold breached
    • ‌RED‌ = Danger threshold breached → Triggers relay outputs
• ‌Relay Control‌: Assign shutdown/alarm logic to relay outputs (OUT1-OUT4).

‌5. Diagnostics & Troubleshooting‌

···········································································································

Our advantages:

1. The brand new product comes with a one-year

comprehensive warranty.

2. All products undergo strict quality inspections.

3. Contact us and our team will provide competitive

quotes and procurement plans.