1. General Information
- Model: DO2401 (Full Part Number: 7400209-030)
- Product Type: Safety-Certified Digital Output Module
- Manufacturer: TRICONEX (a business unit of Schneider Electric)
- Core Function: Receives digital control commands from TRICONEX SIS/DCS controllers, converts them into 24 VDC (or industrial-standard DC) discrete output signals to drive field actuators, and supports real-time fault monitoring to ensure safe and reliable operation. Complies with SIL 2/3 (Safety Integrity Level) requirements per IEC 61508 for critical control scenarios.
2. Electrical Specifications
- Power Supply:
- Input Voltage: 24 VDC ±10% (redundant power input supported to minimize downtime, a hallmark feature of TRICONEX safety modules).
- Power Consumption: ≤8 W under rated load (excludes power drawn by connected field actuators).
- Digital Output Specifications:
- Output Channels: 8/16 independent isolated channels (common for TRICONEX DO modules; channel-to-channel isolation prevents cross-signal interference and limits fault propagation).
- Output Signal Type: 24 VDC sinking or sourcing (configurable via DIP switches or TRICONEX TriStation 1131 software, depending on module firmware version).
- Output Voltage Range: 19–30 VDC (compliant with IEC 61131-2 industrial standards, ensuring compatibility with most field actuators).
- Output Current Capacity:
- Continuous Current: 1 A per channel (sustained drive capability for standard actuators like solenoid valves).
- Peak Current: 3 A per channel (short-duration overload tolerance, e.g., during actuator startup).
- Response Time: ≤2 ms per channel (enables real-time control of time-critical actuators in safety loops).
- Protection Features: Built-in over-current and short-circuit protection (auto-recovery or latch-off mode, configurable; prevents module damage from faulty actuators).
3. Physical & Environmental Ratings
- Dimensions: Standard rack-mount form factor (compatible with TRICONEX SIS chassis; typical: Width ≈ 177 mm, Height ≈ 54 mm, Depth ≈ 254 mm; confirm exact dimensions with official datasheet).
- Weight: Approximately 0.5–0.8 kg (net weight, excluding mounting hardware and wiring accessories).
- Protection Class: IP20 (suitable for indoor control cabinet installation; dust-protected, not water-resistant—requires environmental control in harsh industrial areas).
- Operating Temperature Range: 0°C to 60°C (meets industrial SIS requirements for stable operation in temperature-fluctuating environments).
- Storage Temperature Range: -40°C to 85°C (for safe storage during transportation or downtime).
- Humidity Resistance: 5%–95% RH (non-condensing; moisture ingress is prohibited to prevent circuit corrosion or short circuits).
- Vibration Resistance: 5–500 Hz, 0.5 g acceleration (per IEC 60068-2-6; ensures stability in environments with rotating machinery or mechanical vibration).
- Shock Resistance: 15 g acceleration (11 ms duration, per IEC 60068-2-27; withstands transient impacts during installation, maintenance, or equipment startup).
4. Communication & Compatibility
- Backplane Communication:
- Bus Type: TRICONEX Proprietary Backplane Bus (high-speed, redundant; data transfer rate ≥100 Mbps to ensure low-latency signal transmission between the module and TRICONEX control modules).
- Configuration Interface:
- Compatible with TRICONEX TriStation 1131 software (for channel parameterization, output logic setting, diagnostic monitoring, and firmware updates).
- System Compatibility:
- Designed for seamless integration with TRICONEX SIS platforms (e.g., Tricon, Trident, TriStation).
- Works with TRICONEX control modules (e.g., CM2201, CM3000) and other safety I/O modules (e.g., DI3361 digital input modules, AI3201 analog input modules) to form complete safety control loops.
DO2401 7400209-030 TRICONEX PDF
········································································································
Reviews
Clear filtersThere are no reviews yet.