DELOMATIC-3 DGU2 DEIF

DELOMATIC-3 DGU2 DEIF Controller Operational Procedures‌

1. ‌Pre-Installation Preparation‌

   • Verify power supply compatibility: 230V AC (±10%), 50/60 Hz.
   • Ensure ambient conditions: 0–55°C operating temperature, IP20 enclosure rating3.
   • Disconnect all power sources before handling (ESD protection required).

2. ‌Hardware Installation‌

   • ‌Step 1‌: Mount the controller vertically on DIN rail (EN 60715 standard).
   • ‌Step 2‌: Connect communication cables to RS-485 ports (Terminal X1/X2).
   • ‌Step 3‌: Secure wiring with torque-limited terminals (0.5 N·m max).

3. ‌Software Configuration‌

   • ‌Step 1‌: Power on and access the DM-3 interface via DEIF PowerCom software (v1.0 or later)3.
   • ‌Step 2‌: Navigate to Settings > Generator Set to input rated parameters:
     • Voltage: 400V AC
     • Frequency: 50 Hz
   • ‌Step 3‌: Enable Auto Synchronization mode for grid-parallel operation.

4. ‌Functional Testing‌

   • Initiate self-test via Diagnostics > System Check.
   • Monitor LED indicators:
     • ‌Green‌: Normal operation
     • ‌Red‌: Fault detected (check event log under Alarm Handling)3.

5. ‌Safety Protocols‌

   • Isolate power before replacing modules (refer to AGC-4 installation manual3).
   • Ground all shield wires to prevent EMI interference.

DELOMATIC-3 DGU2 DEIF PDF

delomatic-3-data-sheet-4921240164-uk

·········································································································

Our advantages:

1. The brand new product comes with a one-year

comprehensive warranty.

2. All products undergo strict quality inspections.

3. Contact us and our team will provide competitive

quotes and procurement plans.