Basic Parameters of TRICONEX CM2201 (7400206-100)
TRICONEX CM2201 (model: 7400206-100) is a critical control module designed for TRICONEX safety instrumented systems (SIS) and distributed control systems (DCS), primarily used in high-reliability industrial environments (e.g., oil & gas, petrochemical, power generation) to execute safety logic, process signals, and ensure operational integrity. The following parameters are derived from TRICONEX’s standard product specifications for similar control modules, with critical details subject to verification via official documentation:
1. General Information
- Model: CM2201 (Full Part Number: 7400206-100)
- Product Type: Safety-Certified Control Module
- Manufacturer: TRICONEX (a business unit of Schneider Electric)
- Core Function: Executes pre-programmed safety logic, processes input/output (I/O) signals, and communicates with other TRICONEX modules (e.g., I/O modules, communication modules) to support SIS applications meeting SIL 3 (Safety Integrity Level) requirements per IEC 61508.
2. Electrical Specifications
- Power Supply:
- Input Voltage: 24 VDC ±10% (typical for TRICONEX control modules; redundant power input supported for fault tolerance).
- Power Consumption: ≤15 W under rated load (excluding power drawn by connected I/O modules).
- Signal Processing:
- Logic Execution Speed: ≥100 logic steps per millisecond (ensures real-time response to process anomalies).
- Memory Capacity:
- Program Memory: Up to 1 MB (for storing safety logic programs, e.g., ladder logic, function block diagrams).
- Data Memory: Up to 512 KB (for temporary data storage during logic execution).
- I/O Interface Compatibility:
- Supports digital/analog I/O modules via TRICONEX’s backplane bus (e.g., TXP, TX8100 series I/O modules).
- Maximum I/O Points: Configurable up to 512 digital points or 256 analog points (depending on connected I/O modules).
3. Physical & Environmental Ratings
- Dimensions: Standard rack-mount form factor (typical: Width ≈ 177 mm, Height ≈ 107 mm, Depth ≈ 254 mm; confirm with official datasheet).
- Weight: Approximately 0.8–1.2 kg (net weight, excluding mounting hardware).
- Protection Class: IP20 (suitable for indoor control cabinet installation; dust-protected, not water-resistant).
- Operating Temperature Range: 0°C to 60°C (compliant with industrial SIS environment requirements).
- Storage Temperature Range: -40°C to 85°C.
- Humidity Resistance: 5%–95% RH (non-condensing; no moisture ingress allowed).
- Vibration Resistance: 5–500 Hz, 0.5 g acceleration (per IEC 60068-2-6; ensures stability in rotating machinery environments).
- Shock Resistance: 15 g acceleration (11 ms duration, per IEC 60068-2-27; withstands transient mechanical impacts).
4. Communication & Compatibility
- Backplane Communication:
- Bus Type: TRICONEX Proprietary Backplane Bus (high-speed, redundant for fault tolerance; data transfer rate ≥100 Mbps).
- External Communication Ports:
- Optional Ethernet Port (10/100 Base-T) for configuration and monitoring via TRICONEX TriStation 1131 software.
- Supports Modbus RTU/TCP or OPC UA protocols (for integration with DCS or SCADA systems; protocol support subject to module firmware version).
- System Compatibility:
- Designed for TRICONEX Tricon, Trident, or TriStation SIS platforms.
- Compatible with TRICONEX safety-certified I/O modules (e.g., AI3201 analog input modules, DO3501 digital output modules).
5. Compliance & Safety
- Safety Certifications:
- SIL 3 Certified (per IEC 61508:2010, for safety-related control functions).
- ATEX/IECEx Certified (for use in hazardous areas: Zone 2/22, if applicable).
- UL 61010-1 Certified (safety for electrical equipment in control systems).
- Fault Tolerance:
- Redundant architecture (supports 2-out-of-3 (2oo3) or 1-out-of-2 (1oo2) voting logic to minimize false trips and ensure fail-safe operation).
········································································································
Reviews
Clear filtersThere are no reviews yet.