S732DVR-EST1 GE Security Digital Video Receiver

‌Certification:‌ UL 508 / IEC 61850-3 compliant

‌Pre-Installation Requirements‌

1. ‌Environmental Conditions‌

   • Operating temperature: -20°C to +60°C (derate 1%/°C >50°C)
   • Humidity: 5-95% RH non-condensing
   • Altitude: ≤2000m (3000m with pressure compensation)

2. ‌Power Supply‌

   plaintextCopy Code
   

   Voltage Range: 24V DC ±10% or 110-240V AC (auto-sensing)
Power Consumption: 45W max (all channels active)
Grounding: ≤4Ω to facility ground (6AWG copper wire required)


3. ‌Network Preparation‌

   • Port configuration:
     textCopy Code
     ETH1: 10/100/1000BASE-T (RJ45) - Primary comms
ETH2: 100BASE-FX (SFP) - Redundant ring

   • VLAN tagging: IEEE 802.1Q compliant

‌Mechanical Installation‌

‌Step 1: DIN Rail Mounting‌

1. Align unit with TS35 rail (EN 60715)
2. Engage upper latch, then press downward until lower clip snaps
3. Verify secure attachment (pull test ≥50N force)

‌Step 2: Cable Connections‌

‌Configuration Procedure‌

1. ‌Initial Boot‌

   • Hold RESET button for 5s during power-up
   • Default IP: 192.168.1.100 (DHCP disabled)

2. ‌Web Interface Setup‌

   iniCopy Code
   [System_Config]
Storage_Allocation=JBOD ; RAID0/1/5 optional
Motion_Detection=Area+Time ; Pixel threshold=15%
Retention_Period=30d ; Auto-overwrite enabled


3. ‌Camera Pairing‌

   • Supported protocols: ONVIF Profile S, RTSP, GB/T28181
   • Auto-discovery via Device Manager → Add Camera