PFVO102 PFVO142 3BSE023732R1 ABB

ABB PFVO142 3BSE023732R1 Industrial Controller

1. Installation & Wiring

1.1 Power Requirements

• Input voltage: 380-480V AC (±10%)
• Frequency range: 0-400Hz (nominal 1638Hz for matching unit)
• Terminal allocation:
  • TB1-1: L1 (Phase)
  • TB1-2: Neutral (Shielded cable mandatory)

1.2 Mechanical Mounting

• DIN rail (TS35) installation with 20mm clearance from heat sources
• Ambient temperature: -10°C to +60°C (derate above 40°C)
• 

2. Configuration Procedure

2.1 Parameter Initialization

STEP 1: Power ON → Observe POWER LED (solid green = valid) STEP 2: Press MODE button for 3s to enter setup STEP 3: Navigate menus using: ▲/▼: Parameter selection ◄: Back/Exit ►: Confirm/Submenu STEP 4: Key parameters: - P001: Current limit (Default: 25A) - P015: Frequency setting (Range: 50-1638Hz)

2.2 Motor Tuning

• Auto-tuning: Hold TUNE + ► for 5s until RUN LED flashes yellow
• Manual tuning: Adjust P020 (PID gain) and P021 (Integral time)

3. Operational Monitoring

3.1 Status Indicators

3.2 Diagnostic Codes

• E001: Input phase loss
• E205: IGBT over-temperature (Check cooling fans)

4. Safety Protocols

4.1 Emergency Stop

• Hardwired circuit: Connect NC contacts to S11-S12 terminals
• Response time: ≤35ms (SIL 3 compliant)

4.2 Maintenance

• Quarterly: Clean air vents with dry compressed air (≤0.3MPa)
• Annually: Torque check on power terminals (0.6 Nm)

PFVO102 PFVO142 3BSE023732R1 ABB pdf

3BSE023732R1

··········································································································

Our advantages:

1. The brand new product comes with a one-year

comprehensive warranty.

2. All products undergo strict quality inspections.

3. Contact us and our team will provide competitive

quotes and procurement plans.