369-HI-R-M-0-P1-0-E GE Motor Management Relay NEW IN STOCK

Technical Specifications of Model 369-HI-R-M-0-P1-0-E

Product Category: Industrial Control Module (adjust based on actual product: e.g., Servo Drive / PLC Digital Input Module / Motion Controller)

Supply Voltage:

Input Voltage Range: 24VDC ±10% (or 110-240VAC, 50/60Hz)

Rated Input Current: 2.5A (typical value)

Output Performance:

Output Type: Analog Output (4-20mA) / Digital Output (PNP/NPN) (specify based on actual)

Output Current Capacity: 1A per channel (max)

Output Resolution: 16-bit (for analog type)

Control Mode:

Control Signal: Pulse/Direction (for servo drive) / Modbus RTU (for communication-based control)

Positioning Accuracy: ±0.01mm (or ±1 pulse, adjust based on application)

Response Time: ≤1ms (typical)

Communication Interface:

Supported Protocols: Ethernet/IP, PROFINET, Modbus TCP (specify actual supported protocols)

Interface Type: RJ45 (Ethernet) / RS485 (serial communication)

Data Transfer Rate: Up to 100Mbps (Ethernet)

Environmental Ratings:

Operating Temperature: -10°C to +60°C (ambient)

Storage Temperature: -25°C to +85°C

Humidity: 10% to 90% RH (non-condensing)

Protection Class: IP20 (front panel) / IP65 (if applicable for harsh environments)

Mechanical Specifications:

Installation Type: DIN Rail Mount (35mm) / Panel Mount

Dimensions (W×H×D): 45mm × 120mm × 150mm (typical, replace with actual size)

Weight: 350g (approximate)

Safety Certifications:

Compliance Standards: CE, UL, cUL, RoHS

Short Circuit Protection: Yes (output overcurrent protection)

Overvoltage Protection: Yes (input voltage surge protection)

Additional Features:

Status Indicators: Power (LED), Run (LED), Fault (LED)

Fault Diagnosis: Built-in self-diagnostic function (output short circuit, overheating detection)

Parameter Configuration: Via software (e.g., brand-specific configuration tool) or DIP switches

369-HI-R-M-0-P1-0-E GE PDF

369-HI-R-M-0-P1-0-E