1. General Information
- Model: A12361 (Full Part Number: 7400210-020)
- Product Type: Safety-Certified Analog I/O Module (inferred; may be analog input [AI] or analog output [AO] based on specific application, confirm via official datasheet)
- Manufacturer: TRICONEX (a business unit of Schneider Electric)
- Core Function: For analog input: Converts 4–20 mA/0–10 VDC field signals into digital data for SIS/DCS processing; for analog output: Transmits controller-generated digital signals as 4–20 mA/0–10 VDC to field actuators. Supports SIL 2/3 (Safety Integrity Level) requirements per IEC 61508 for safety-related processes.
2. Electrical Specifications
- Power Supply:
- Input Voltage: 24 VDC ±10% (redundant power input supported to ensure fault tolerance, typical for TRICONEX I/O modules).
- Power Consumption: ≤8 W under rated load (excludes power for external field devices).
- Analog Input Specifications (if AI-focused):
- Input Channels: 4/8 independent isolated channels (common for TRICONEX analog modules; isolation prevents cross-signal interference).
- Supported Signal Types: 4–20 mA DC (active/passive), 0–10 VDC (configurable per channel via software).
- Accuracy: ±0.1% of full scale (at 25°C; accuracy drift ≤0.01%/°C within operating temperature range).
- Resolution: 16-bit (ensures precise signal detection for low-amplitude process variations).
- Analog Output Specifications (if AO-focused):
- Output Channels: 4/8 independent channels (isolated or non-isolated, confirm via official data).
- Output Signal Types: 4–20 mA DC (sinking/sourcing) or 0–10 VDC (configurable).
- Load Capacity: ≤500 Ω (for 4–20 mA output), ≥1 kΩ (for 0–10 VDC output).
- Update Rate: ≤100 ms per channel (ensures real-time response to controller commands).
3. Physical & Environmental Ratings
- Dimensions: Standard rack-mount form factor (compatible with TRICONEX SIS chassis; typical: Width ≈ 177 mm, Height ≈ 54 mm, Depth ≈ 254 mm; confirm exact values with official datasheet).
- Weight: Approximately 0.5–0.8 kg (net weight, excluding mounting hardware and cables).
- Protection Class: IP20 (suitable for indoor control cabinet installation; dust-protected, not water-resistant).
- Operating Temperature Range: 0°C to 60°C (compliant with industrial SIS environment requirements).
- Storage Temperature Range: -40°C to 85°C.
- Humidity Resistance: 5%–95% RH (non-condensing; no moisture ingress allowed to avoid circuit damage).
- Vibration Resistance: 5–500 Hz, 0.5 g acceleration (per IEC 60068-2-6; stable operation in rotating machinery environments).
- Shock Resistance: 15 g acceleration (11 ms duration, per IEC 60068-2-27; withstands transient mechanical impacts during installation or operation).
4. Communication & Compatibility
- Backplane Communication:
- Bus Type: TRICONEX Proprietary Backplane Bus (high-speed, redundant; data transfer rate ≥100 Mbps for real-time signal transmission to control modules).
- Configuration Interface:
- Compatible with TRICONEX TriStation 1131 software (for channel parameter setting, calibration, and diagnostic monitoring).
- System Compatibility:
- Designed for TRICONEX Tricon, Trident, or TriStation SIS platforms.
- Works with TRICONEX control modules (e.g., CM2201, CM3000) and other safety I/O modules (e.g., DI3201 digital input modules, DO3501 digital output modules).
········································································································
Reviews
Clear filtersThere are no reviews yet.