H6200A HIMA Transmitter Circuit 250V 4-20Ma

Steps to Set Up Programs for H6200A

1. • ‌Prepare Hardware and Software‌

     • Ensure you have a computer, an RS232 communication cable, and the appropriate software like InoServoShop or similar tools for parameter management.‌
     • Verify all connections before powering on the drive to avoid faults.‌

       • ‌Connect and Power On the Drive‌

         • Link the RS232 cable between the computer and the H6200A drive, then apply power to initialize the system.‌
         • Monitor for startup diagnostics to confirm proper connectivity.‌

           • ‌Launch Software and Select Configuration‌

             • Open the programming software (e.g., InoServoShop) and navigate to the device selection menu.‌
             • Specify the drive series and firmware version to ensure compatibility with your setup.‌

           • ‌Modify Key Parameters‌

             • Adjust parameters such as acceleration/deceleration times, speed settings, or PID controls for process optimization.‌1
             • For example, customize DI terminal functions or encoder settings to match operational needs.‌

           • ‌Finalize and Test Settings‌

             • Save all changes and perform a test run to validate the program logic, including safety features like overvoltage protection.‌
             • Troubleshoot any errors using diagnostic tools before deploying.‌

H6200A HIMA pdf

H6200A

···········································································································

Our advantages:
1. The brand new product comes with a one-year comprehensive warranty.
2. All products undergo strict quality inspections.
3. Contact us and our team will provide competitive quotes and procurement plans.